产品banner
Your current location : Home >> Products >> emulsified oil

Contact UsContact Us

Yingkou kangru Technology Co., Ltd

Contact: Mr. Zhao

Telephone: +86-18841775200 

Address: Steel Industrial Park, Laobian District, Yingkou City, Liaoning Province

Post Code: 115005

Website: http://www.kangru.com/en



Emulsion cutting oil for machining center

Emulsion cutting oil for machining center

  • Cname:emulsified oil
  • Views:Times
  • Release date:2021-01-11 13:54:55
  • Content

1、 Overview


This product is made of refined mineral oil, high efficiency antirust agent, lubricant, emulsifier, surfactant and other raw materials by special process. This product is easy to emulsify, less consumption, no peculiar smell, good lubrication, cooling, cleaning, rust prevention performance. Widely used in turning, grinding, milling and other machining processes.


2、 Technical index

project


quality index

test method

(refer to SH / t0365)


Oil based appearance (15-35 ℃)

Brownish red oil

Visual inspection

Emulsion pH 5%

8.0~9.5

SH/T 0365-92

Emulsion stability (15-35 ℃),

24h ml

soap

≤0.5

oil

nothing

Salt allowance

(15~35℃), 4h

No phase separation

Antirust property of emulsion ((35 ℃± 2 ℃)

Cast iron sheet

Single chip 24h

qualified

Lamination 4H

qualified

Emulsion corrosion test (55 ± 2 ℃), full immersion

45 × 24h steel

qualified

62 × brass 4H

qualified

Ly16 aluminum 4H

qualified

Defoaming performance ml / 10min ≤


2

SH / t0365-1992 Appendix E


3、 How to use it




This product can be mixed with water in any proportion to form emulsion. Generally, the recommended concentration is 3-5%. It can be mixed into different concentrations according to the difficulty of processing and climate.




4、 Note:




1. When preparing the new solution, the water should be drained first and then the original solution should be added, and it can be used only after being stirred evenly.




2. The total hardness of the water used to prepare the working fluid shall not exceed 300ppm, otherwise the stability of the working fluid may be decreased, and the serious case will not be emulsified.




3. The equipment is equipped with magnetic filter and other filtering devices to remove impurities in time.




4. This product can't be mixed with other cutting fluids, so as not to affect the use effect. If it needs to be mixed, it can be used only after it is tested and feasible.




5. 5 ~ 35 ℃ indoor sealed storage. In the process of storage and transportation, it is necessary to prevent the mixing of water and impurities, so as to avoid the deterioration of products.




5、 Packaging, storage and transportation




1. Package: 20 l or 200 L barrel.




2. This product is nontoxic and nonflammable. It can be used for general commodity storage and transportation.


Tags

0

Recently Viewed:

Copyright © Yingkou kangru Technology Co., Ltd support: Yingkou Zhongchuang Network Technology Co., Ltd