Contact: Mr. Zhao
Telephone: +86-18841775200
Address: Steel Industrial Park, Laobian District, Yingkou City, Liaoning Province
Post Code: 115005
Website: http://www.kangru.com/en
1、 Overview
This product is made of extreme pressure lubricant, high efficiency antirust agent, surfactant, etc.
2、 Characteristics
1. Improve grinding and cutting efficiency, extend tool life.
2. Excellent lubricity, significantly improve the surface finish of the workpiece.
3. Excellent anti rust, ensure that the workpiece and equipment are not corroded.
4. The cooling effect is good, and the heat generated in the processing process can be taken away in time.
5. Excellent cleaning performance, ensure no dirt on the surface of workpiece and equipment.
6. The working fluid is transparent and easy to observe the working face.
7. The diluent is tasteless and has no stimulation to the operator.
8. Excellent corrosion resistance, strong resistance to hard water. It can be recycled for a long time, not easy to stink and has long service life.
3、 Technical index
Projects | quality index | test method | ||
Concentrated solution | bin stability Above 0 ℃ | No delamination, phase change and colloid | GB/T 6144-2010 | |
appearance | Light yellow transparent liquid | Visual inspection | ||
Diluent 5% | transparency | Transparent or translucent |
GB/T 6144-2010 | |
PH value | 8.0～10.0 | |||
Antirust test (35 ℃± 2 ℃ grade I gray cast iron) | Single chip 24h | qualified | ||
Lamination 4H | qualified | |||
Corrosion test (55 ℃± 2 ℃ full immersion) | First class gray cast iron | qualified | ||
Red copper 4H | qualified | |||
Defoaming property (10 min) | ≤2ml | |||
Surface tension / (Mn / M) | ≤40 | |||
4、 How to use it
The recommended concentration for finishing is 3 ~ 5%. The concentration can also be adjusted according to the processing difficulty and climate.
5、 Precautions
1. When preparing new liquid, we should follow the principle of draining water first, then adding original liquid, and mixing evenly before using.
2. The equipment is equipped with magnetic filter and other filtering devices, so as to remove the grinding debris in time and ensure the service life of grinding fluid.
3. This product has not been tested, and should not be mixed with other cutting fluids, so as not to affect the use effect.
6、 Packaging, storage and transportation
1. 20 L, 200 L barrel.
2. 5 ~ 35 ℃ indoor sealed storage. Prevent water and other impurities from mixing in during storage, so as to avoid product deterioration.
